“Quality is never an accident...

it is always the result of intelligent effort.”

- John Ruskin

Call us! 403.289.8852 | info@tlj-eng.com

#301, 301 - 14th Street NW
Calgary, AB T2N 2A1

News

VRF Technology – what you need to know

Part 2 – Indoor or outdoor VRF Condensers 

Variable refrigerant flow (VRF), also known as variable refrigerant volume (VRV), use refrigerant as the cooling and heating medium. This refrigerant is conditioned by a condensing unit, and is circulated within the building to multiple indoor units. For the basics on a VRF system, please see Part 1 of this series.

VRF System types

  • Cooling only systems (less popular)– those systems can only cool. Heating is not available. Fan and Dry modes are available for each indoor unit independently.
  • Heat Pump systems (most popular)– all the indoor units can either heat, or cool (not at the same time). Fan and Dry modes are available for each indoor unit independently.
  • Heat Recovery systems (less popular)– those systems are the most sophisticated ones, where cooling and heating may be available by each indoor unit, independently, at the same time.
  •  

    The condensing unit can be either an air source (outdoor) or water source (indoor) condenser.   An air source condenser is used when it can be located outdoors within the limiting distance. The diagram below would be a simple example of each zone.


    air cooled 1

    Air source condenser VRF system

    In a water source condenser, water is used as the heat transfer fluid. This means the condenser can be located inside in a small mechanical room. Circulating water is then used to transfer heat as required. The diagram below shows this process.

    wr2 doubleheatrecovery

    Water Source condenser VRF system

    Circulated water is then piped to a central mechanical room where a combination of a boiler, chiller or fluid cooler is used.

    Initial costs verses operating costs

    HVAC systems are obviously one of the key factors of building energy consumption. Studies investigated the system performance and economic value of variable refrigerant flow (VRF) systems relative to conventional HVAC systems.

    One comparative analysis covered six building types - medium office, standalone retail, primary school, hotel, hospital, and apartment - in a eleven climate zones. The major findings are that the VRF system has an average of 39% percent HVAC energy consumption savings.

    A VRF system complete with a Dedicated Outdoor Air System (DOAS) provide a very high efficient HVAC system. If you are unfamiliar with DOAS, we have a past article on these systems. (dedicated-outdoor-air-systems).

    For more information on this topic and others, please contact our office:  This email address is being protected from spambots. You need JavaScript enabled to view it.

    The TLJ Team